This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Looks like the very early 303 blank rounds that had a mock bullet to aid feeding from a magazine,, they were eventually withdrawn due to the mock bullet becoming detatched and lodging in the rifles bore or even exiting the barrel and causing injurys
As stated, it is a "Cartridge S.A. Blank .303 inch Cordite with Mock Bullet Mark VI", approved 24 December 1902 and shown in Lists of Changes Paragraph 11317. Following incidents of the mock bullet either becoming stuck in the barrel or actually firing, the Royal Navy removed the thin sheet brass "bullet" in September 1906 and the army in February 1907. It then became "Cartridge S.A. Blank .303 inch Cordite without Mock Bullet Mark VI". The case should be blackened.
Your example was made by Greenwood & Batley Ltd some time before 1907. When unfired it should look like this.
Thanks for the quick replies. Tony where are your books available from. Im getting more interested in the older 303s as i seem to have found several of late and would like to know more about them. Cheers Mick.
Hi falcon the primer has been struck and the end is ragged so i assume this is what they look like when fired. Its the first ive come across but im going to keep my eyes out for one intact. Cheers Mick.
Thanks for the quick replies. Tony where are your books available from. Im getting more interested in the older 303s as i seem to have found several of late and would like to know more about them. Cheers Mick.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.