I've had the attached photos and dimensions forwarded to me for ID assistence but am coming up zeros. Any support would be appreciated. Austin
****************************
The overall length is 125mm
The internal depth to the disc is 99.5mm Diameter at top is 21.5mm Diameter at tapered section is 24mm Diameter at widest part is 30.5mm Width of the grove at the base is 3mm Bottom of casing (ejector ring??) is 2.5mm Bottom of tapper to top of grove is 24.5mm Bottom of tapper to bottom of round is 30mm
On the base
Overall diameter is 30mm
Inner (flange)diameter is 21.75
Holes 5.1mm
Depth 4.1mm
Primer 5.1mm
Obviously steel construction weight in current condition is approx. 1/4lb.
****************************
The overall length is 125mm
The internal depth to the disc is 99.5mm Diameter at top is 21.5mm Diameter at tapered section is 24mm Diameter at widest part is 30.5mm Width of the grove at the base is 3mm Bottom of casing (ejector ring??) is 2.5mm Bottom of tapper to top of grove is 24.5mm Bottom of tapper to bottom of round is 30mm
On the base
Overall diameter is 30mm
Inner (flange)diameter is 21.75
Holes 5.1mm
Depth 4.1mm
Primer 5.1mm
Obviously steel construction weight in current condition is approx. 1/4lb.