British Ordnance Collectors Network
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
No1 fuze ?
- Thread starter magpie
- Start date
J
John D. Bartleson Jr.
Guest
Post an image of the top of the brass fuze body without all the other items installed.
It is NOT an Artillery fuze No. 1 which was made long before 1916.
John
It is NOT an Artillery fuze No. 1 which was made long before 1916.
John
Hello,
No N1 for Artillery but N1 for Aircarft bomb ! (with a body of Artillery fuze No18).
Take a look here : http://www.bocn.co.uk/vbforum/threads/81718-unknow-fuze?highlight=HERL+BOMB
Best Regards
No N1 for Artillery but N1 for Aircarft bomb ! (with a body of Artillery fuze No18).
Take a look here : http://www.bocn.co.uk/vbforum/threads/81718-unknow-fuze?highlight=HERL+BOMB
Best Regards
Dear TimG,
That is a most interesting comment about the fuze being made by The Cowey Engineering Co Ltd. They were a most talented company,making the famous Cowey speedometer, Klaxon type horns, aircraft equipment and even soda-water syphon filling machines, plus many other motoring acessories. (Even the cars had air-suspension)I have a feeling that the factory buildings, right near the Kew station, are still standing.
Do you have a catalogue of their products?
Martin.
That is a most interesting comment about the fuze being made by The Cowey Engineering Co Ltd. They were a most talented company,making the famous Cowey speedometer, Klaxon type horns, aircraft equipment and even soda-water syphon filling machines, plus many other motoring acessories. (Even the cars had air-suspension)I have a feeling that the factory buildings, right near the Kew station, are still standing.
Do you have a catalogue of their products?
Martin.
Martin,
It appears that Cowey became Archer Engineering and were at Station Avenue, Kew Gardens, which as you say is next to the station. I pass the station every time I go to the Archives, so next time I go, I'll cross over the foot bridge and have a look. I don't have their catalogue, just a document of Great War suppliers.
Tim
It appears that Cowey became Archer Engineering and were at Station Avenue, Kew Gardens, which as you say is next to the station. I pass the station every time I go to the Archives, so next time I go, I'll cross over the foot bridge and have a look. I don't have their catalogue, just a document of Great War suppliers.
Tim
Tim,
Thanks for the information about becoming Archer Engineering. Mr Cowey lived in the area, and was a prolific inventor, still patenting during WW2. You can see his inventions in espacent.
Regarding the ex-premises, I think that they are the buildings on the left of the station, facing Kew gardens. There is an access road alongside-It looks surprisingly small for so well-known establishment, but I think that he was a great publicist, and his products were always of the highest quality. I think that he became involved in automatic soda-water syphon filling machines because of knowing Mr Eugster, the founder of the British Syphon Co.
Martin.
Thanks for the information about becoming Archer Engineering. Mr Cowey lived in the area, and was a prolific inventor, still patenting during WW2. You can see his inventions in espacent.
Regarding the ex-premises, I think that they are the buildings on the left of the station, facing Kew gardens. There is an access road alongside-It looks surprisingly small for so well-known establishment, but I think that he was a great publicist, and his products were always of the highest quality. I think that he became involved in automatic soda-water syphon filling machines because of knowing Mr Eugster, the founder of the British Syphon Co.
Martin.
Fusse2004
Thanks for the illustration-Is it to scale? As far as I can see, the fan would screw the firing point right into the detonator, or am I missing something? I imagine it should just project from the sleeve, and impact on the fan/ striker-head would then shear the pins (Scherstift), and drive the point into the primer. The drawing also shows a hole for the safety pin through the Sicherungs-scheibe, but this is not evident in the fuze parts at the beginning of this thread. Again, there are no threads on the body of the fuze in the illustration, and the smaller external view of the fuze seems to be incorrect, as the Safety Plate is shown as entering a hole in the body, rather than fitting under the striker-head(Aufschlag-teller), which is not shown!
Any comments?
Martin.
Martin
Thanks for the illustration-Is it to scale? As far as I can see, the fan would screw the firing point right into the detonator, or am I missing something? I imagine it should just project from the sleeve, and impact on the fan/ striker-head would then shear the pins (Scherstift), and drive the point into the primer. The drawing also shows a hole for the safety pin through the Sicherungs-scheibe, but this is not evident in the fuze parts at the beginning of this thread. Again, there are no threads on the body of the fuze in the illustration, and the smaller external view of the fuze seems to be incorrect, as the Safety Plate is shown as entering a hole in the body, rather than fitting under the striker-head(Aufschlag-teller), which is not shown!
Any comments?
Martin.
Martin
Thank you all for your replies, as Hootch says it's a no18 fuze or similar that's been modified and Martin is correct as far as i can see how it works, it's also nice to see the picture on the bomb, the drawing would seem to be wrong although there may be another MK of No1 fuze or another maker.
Here's 2 more pictures shewing the needle pin screwed in as far as it goes being a little bent, and the shear pins on the side.
Thanks Andy.
Here's 2 more pictures shewing the needle pin screwed in as far as it goes being a little bent, and the shear pins on the side.
Thanks Andy.
Attachments
Edwin Showell & Sons Ltd, Stirchley, a possibility for the original manufacturer, as they are listed as both pre-war and war: "Engineers in non-ferrous alloys and small steel work. Capstan lathe products from the bar up to 2" diameter... ...Brass founders".
A possibility for AS is Arthur Shaw* (or the Shaw Foundry Co.), Willenhall, who made, amongst other things, parts for rifle and Mills grenades, and bodies of Allways fuzes.
*Also made 50,000 No.36 grenade in 1940.
Tom.
A possibility for AS is Arthur Shaw* (or the Shaw Foundry Co.), Willenhall, who made, amongst other things, parts for rifle and Mills grenades, and bodies of Allways fuzes.
*Also made 50,000 No.36 grenade in 1940.
Tom.
Last edited:
Hello,
I think it's the same fuze : http://www.bocn.co.uk/vbforum/threads/18157-No-7-1-A-S-1*-Fuze
Cheers
I think it's the same fuze : http://www.bocn.co.uk/vbforum/threads/18157-No-7-1-A-S-1*-Fuze
Cheers
