What's new
British Ordnance Collectors Network

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

My Glasmine 43 and repro Spregkorper 28 Block

ekim199944

Well-Known Member
Photo's of my Glasmine 43 and the Sprengkorper 28 block i made for it. I think it turned out pretty good. Started with a wooden block, cut to the right size. Could not find a fuze well to put in, so what I used was a 10m 1 nut. I drilled a hole and set the nut in. When the paper and label covers it you don't know it is just a nut in there. Covered block with brown paper, applied label, which I made up from photo's, then painted it with melted bee's wax.

I have the original glass for the top, but it was so fragile, that I stored it for safe keeping. Used a very thin 1/32" piece of clear plastic to replace it.

In all I think it looks good.DSC_0482.jpgDSC_0483.jpgDSC_0484.jpgDSC_0485.jpgDSC_0486.jpgDSC_0487.jpgDSC_0488.jpg
 
Top