an anyone ID this please? (not the coin) ;-)
It may be entirely unrelated to ordnance.
Cheers
Pete
It may be entirely unrelated to ordnance.
Cheers
Pete
British Ordnance Collectors Network
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Is this a Fuze
- Thread starter peteblight
- Start date
Due to its characteristics, I would say no. It looks like a digger tooth or something similar. If it were a fuze, the threads would extend to the bottom of the flange. Since there is a gap between the threads and flange, it would seem that it was designed to pass through something (the thickness of the gap betwwen threads and flange) and then be held by something on the threads. Additionally, the threads on the outside of the flange show that something else would attach that doesn't require much of a hold since the threads are minimal. Engineering rule of thumb says a minimum of three threads for an attachment.
They were found in the UK with some ordnance, but I was looking at the threads and to me the pitch looked wrong for British fuzes.
Pete
Pete
To me the above statement says there would be a 'remove before firing' type cap. Is there any way you can clean out the inside and see what is there ? If it is hollow all the way through then the corroded cap may well be just a thread protector.
Hangarman
I don't have the item, some friends have asked me for an ID.
I expect they'll clean it or Xray it and hopefully get an answer.
Cheers
I expect they'll clean it or Xray it and hopefully get an answer.
Cheers