This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I think that's a typo and it's either 3" or 2.7". As far as I'm aware, the 3"RP didn't have a HEAT warhead. The 2.7" which is a 68mm SNEB, did. We, the UK, manufactured 68mm SNEB under licence and I suspect the 931 fuze was for our version of the HEAT rocket.
It transpires there was a hollow charge HE warhead for the 3" RP - Head HE, 12 lb, No. 1, Mk. 1. The fuze used was the No. 931.
Very briefly, there is a thermal initiator, the gases from which force a soft iron slug through an induction coil. The generated electrical charge is stored in a capacitor. There is a contact switch on the warhead, no further details. On impact the switch is closed and the circuit completed with the capacitor discharging through the detonator.
The 3-inch aircraft rocket mentioned in Air Publication 2802A from 1951 is the: Shell H.E. 60 lb., G.P. (hollow charge), rocket, aircraft, 3 in, No.1, Mk 1.
The fuze is the nose fuze No. 893 Mk 1.
In the Air Publication 2802A from 1971 is mentioned in the index also a Head, HEAT (hollow charge), Type 23. But deleted. So no info available.
Found some information about the type 23 warhead. It is one of the warheads belonging to the 68 mm FFAR SNEB F1 Rocket.
But still not a HEAT rocket with a No. 391 base fuze.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.